So some of our pieces didn't exactly fit together perfectly. I think that was because Hannah and I work on the pieces separately and even thought we gave each other the measurements, there was some sort of mis-communication about them. Hannah fixed the notches and pegs and revised some of the pieces. Instead of pegs in the horizontal walls between the motor and the wheels, it is connected to the horizontal base piece by a long notch- it essentially slides in from the side (and looks like a face).
walls
Also, instead of a full back panel we switched to two little notches and pegs that will stick out and hold the board in.
bottom piece
the second horizontal piece- the base that the rod rests on and the top of the board box
The side walls of the base
the rest of the pieces
Final Appearance
No comments:
Post a Comment